dcsimg
   
 
Your Cart: 0 items $0.00  |   My Account   |   View Wish List   |   View Cart   |   Register   |   Log In
Wall & Ceiling Textures
Aerosol Wall Textures Aerosol Ceiling Textures Texture, Touch Ups & Guns Decorative Finishes

Patch & Repair
Tile & Grout Wall Guards Wall Patches Spackling Mesh Tape Patching & Repair Tools

Kitchen & Bath
Caulk Tools Caulk Strips Tub, Sink & Tile Refinishing Touch Ups

Sundries
Steel Wool Wood Touch Up Paint Products Outdoor Products

80099_12907_EasyGate_new_box_275x340.jpg

Easy Gate No-Sag Gate Kit
Building a fence or utility gate properly is critical to reduce sagging and maintain use and longevity over time.

Homax EASY GATE No-Sag Gate Kit enables any homeowner to build a sag-free, square gate in as little as 20 minutes. The kit includes 4 gate brackets with attached hinges and screws for easy assembly. All parts are constructed of heavy powder-coated steel in a black finish to resist rust. Constructs a gate for an opening of 25" to 72" wide, with no height restrictions. Fits various lumber sizes (2x3's, 2x4's, 2x6's, etc.) and types. Choose a left or right swing. Ideal for use with fence gates, driveway gates, corral gates, and shed doors.

Why Choose Homax EASY GATE No-Sag Bracket Kit?
  • Build custom sized gates, add to pre-fab gate applications, or repair sagging gates.
  • Black powder coated steel construction enables sturdy, square no-sag gate
  • Salt-spray tested, weather and rust-resistant
  • High-quality, welded one-piece design for maximum strength
  • Accommodates various horizontal rail sizes
  • Use for left or right-swinging gate
  • No Z-bracing required
  • No angled cuts needed
  • For openings 25 in. (63.5cm) to 72 in. (183cm) wide; no height restriction
Each kit includes:
  • (2) hinged brackets
  • (2) non-hinged brackets
  • (36) mounting screws
Where To Use
  • Fence gates
  • Driveway gates
  • Corral gates
  • Shed doors
  • Deck gates
Homax EASY GATE No-Sag Gate Kit can be used on wooden fence gates to add curb appeal and character to your home, while enhancing privacy and safety. In addition, you can use EASY GATE to build utility gates such farm fences, livestock stall doors, and driveway gates to protect your property, equipment and more.

Building a sturdy, square gate and eliminating problem gate sagging is a snap with Homax EASY GATE No-Sag Bracket Kit.

Homax® - Creating Better Homes™
Shipping Details >>
Total Order Amount Shipping Price
$0.01 - $24.99 $5.99
$25.00 - $34.99 $6.99
$35.00 + FREE
Product Review:


    
Item Number: 80099
Price: $35.89
Size: 1 Kit
Quantity:  
Add to Wish List >>

Got Questions?
Chat Button
 

Easy Gate No-Sag Bracket Kit 3 5 11 11
It's up to you I purchased the easygate brackets to install a gate in my back yard. It looked simple and I thought it was a good idea. First was the weld joint where it fits, against the 2x4, I had to make a notch for it to fit in. Then the last bracket I took out of the box was bent. I have a power jack so was able to straighten it out. It took me over 4 hours to make a gate frame. Got it all together and took out to see how it fits. Well low and behold, it is crooked now what do I do? I have remodeled my home from top to bottom and inside to outside and never had the problem I have had with the easygate brackets. I will not use them again. March 16, 2015
Pitiful hinges The brackets are useful, but the hinges are pitifully inadequate. The hinges may be rated for a heavy load, but they are not heavy duty. By design, one hinge is turned up so the pin can drop out. I had hinges that lasted less than a week. December 5, 2014
liked, but It would be great if they came in a longer bracket say 6 in. It will reduce the sage for gates from 5 to 7 feet. I also would like the screw whole pushed out so the angel bar does not interfere with a straight screw gun alignment. It was tough getting a flat finish with the screw heads November 17, 2014
wood size issue The instructions on box say you can use various wood sizes, 2x3,2x4,2x6 etc, but after I cut my 2x4 into the 4 lengths, came to realize that the vertical length on the hinged side has a fixed opening that only fits 2x3 size.Only way to know this is to open box and measure. This needs to be clearly noted on box that 2x3 is only option for that side.Thanks October 20, 2014
No compatible with 2x cover boards my fence has 2x6 cover boards. The hinge will not work in a concealed arrangement with out ugly jerry rigging if you plan on using thicker than 1/2" cover boards.This really caused me some problems due to this not being mentioned before we started construction. September 24, 2014
Missing Instructions This is the second gate I am making. The first lasted 5 years with no sagging, so it is worth the trial and error. It is not as easy as the video. Sure connecting the 4 2X4s is easy, but then hooking the hinges to the post getting enough clearance and setting the hardware was a pain. NEED instructions for sizing the easy gate and hints to hook the hinges to the post. July 11, 2014
Excellent Quality & Easy to Build I used 3 kits for 3 gates in my fence 3 years ago. They were super-easy to put together and versatile. I made a narrow, tall gate, a wide gate and a normal gate. They all look as good as the day I installed them. July 7, 2014
Do Not Recommend Within the first 24 hours after installation, it sagged. So much so that I couldn't even close the gate. the actual hinges that mount to the main post BENT! I have never seen a hinge bend like these. The brackets were too small for treated 2x4's so you have to trim every piece to make it fit. This is not an EASY gate. February 25, 2014
2next>>

Tools Required:
  • Saw
  • Screw Driver or Screw Gun
  • Drill
  • 1/8” Drill Bit
Note: Pre-Drill all screw holes with 1/8” drill bit

Key: Wood Screw (W), Pan Head Screw (P)

Step-by-Step Directions

Connect brackets to top & bottom rails:
  1. Put (1) Wood Screw (W) into hole closest to the outside edge.
  2. Put (1) Pan Head Screw (P) into each screw hole location. Use (2) Pan Head Screws (P) for each bracket to attach the top and bottom rails.
  3. Repeat Steps 1 & 2 on the bottom rail.
Connect side rails:
  1. Connect the right side rail to the right top and bottom brackets. Use (2) Pan Head Screws (P) for each bracket.
  2. Repeat on left side rail.
Connect hinges to left side rail:
  1. Attach the top hinge to the left side rail using 4 Wood Screws (W).
  2. Repeat on the bottom hinge.
Connect Gate to Post:
  1. Determine if the hinges will be on the left or right side of the gate opening and which way the gate will swing. Attach the fence boards accordingly.
  2. Attach top hinge to 4 x 4 post with 4 Wood Screws (W).
  3. Repeat on the bottom hinge.
Note: Square not required. Gate frame will automatically be squared when brackets are attached.

Homax EASY GATE works with the following types of material:
  • Western Red Cedar
  • White Oak
  • Black Locust
  • Tropical Hardwoods
  • Pressure Treated Pine
  • All Types of Construction Grade Woods
  • Plastic Lumber
  • Silicone
  • Acrylic