|
6034-6 Festo Polyurethane Tubing, 6mm
If you are using Push in fittings you want to be sure you use the right type of tubing. Push-in fittings work by sealing around the outside of the tubes. As a result the correct tube durometer (hardness) becomes vital to prevent leaks. We only carry original Festo tubing to avoid any potential problems. 1.00mm Wall Thickness. Outer Diameter: 6mm Wall Thickness: 1.00mm Pressure range: 150 psi (10 bar) at 20c, 88 psi (6 bar) at 60c Temperature range: -86F to +140F (-35C to +60C) Tip: When cutting the tubing use a sharp razor and cut at 90 degrees to the length of the tube. This will minimize the chance of any leaks.
| 
