Turbojet fuel pump - Model 700

Our largest pump, Model 700, has an open flow rate of 3.6 l/min when operated at the recommended voltage of 6V and up to 5.7 l/min for intermittent use when run at 12V.

As with all our pumps, it features extremely high precision stainless steel and PEEK plastic gears, our unique floating drive gear design and a hard anodized aluminum body.

You should use a high quality fuel automotive-type filter on the inlet side (suction line, before the pump). It comes with 1/4 inch NPTF ports.

The pump does not require any break in and is ready to use. It can be installed in any orientation.

Characteristics:

Weight: 460 g (16.2 oz)

Diameter: 46 mm

Length (not including fittings): 917 mm

Bypass valve or regulator required: No

Pump gears: High precision stainless steel and PEEK plastic

Pump body: Hard anodized aluminum

Min. start voltage: 0.6 ± 0.15 Volts

Open flow rate: Approx. 3.6 l/min @ 6 V (recommended) and 5.7 l/min @ 12 V (intermittent use only)

Click here for complete specifications.