Painting Systems (PS) and Coating Systems (CS)

Shopping Cart

	Your Cart is Empty
	View Cart

Product Search

Products Catalog
	Books
	Membership- Join/Renew
	SSPC Logo Wear
	Standards
		Summary of How to Use the SSPC Standards
		Abrasives (AB)
		Paint Application (PA)
		Painting Systems (PS) and Coating Systems (CS)
			SSPC-PS Guide 22.00 Guide for Selecting One-Coat Preconstruction or Prefabrication Painting Systems
			SSPC-CS23.00/AWS C2.23M/NACE No. 12
			SSPC-PS 24.00, Latex Painting System for Industrial and Marine Atmospheres, Performance-Based
			SSPC-PS 26.00, Aluminum Pigmented Epoxy Coating System Materials Specification, Performance-Based
			SSPC-PS 27.00, Alkyd Coating System Materials Specification, Performance Based
			SSPC-PS 28.01, Two-Coat Zinc-Rich Polyurethane Primer/Aliphatic Polyurea Topcoat System
		Paints and Coatings (PAINT)
		Qualification Procedures (QP)
		Surface Preparation (SP)
		Technology Guides (GUIDE)
		Technology Reports (TR)
		Technology Updates (TU)
		Test Panel Preparation Methods (ME)
		Technical Insight Reports
	Study Guides & Teasers
	2009 SSPC Products Catalog

Painting Systems (PS) and Coating Systems (CS)

These documents cover SSPC Painting Systems (PS) and Coating Systems (CS) documents, of which there are three types: complete painting systems, painting system guides, and performance-based painting system material specifications. PS and CS documents were developed only for steel surfaces, not for wood or concrete.

SSPC-PS Guide 22.00 Guide for Selecting One-Coat Preconstruction or Prefabrication Painting Systems

This guide covers those shop primers used in today's modern commercial shipyards for preconstruction and prefabrication priming of abrasive blast cleaned structural steel and steel plates. To maximize efficiency in new construction, all ships' steel plates, shapes, and angles are abrasive blast cleaned, shop primed, and stored for future use in preparation of sections of ships, called modules or units. Shop primers are covered by generic classification.

Automatic abrasive blast cleaning and coating with preconstruction primer is common practice in shipbuilding today.

Price: $25.00

SSPC-CS23.00/AWS C2.23M/NACE No. 12

This standard is a procedure for the application of metallic thermal spray coatings (TSCs) of aluminum, zinc, and their alloys and composites for the corrosion protection of steel. Required equipment, application procedures, and in-process quality control (QC) checkpoints are specified. This standard may be used as a procurement document. Appendix A presents a fill-in-the-blanks model procurement specification. The flow diagram in Figure 1 provides an overview of the thermal spray coating process presented in this standard. Not included in this standard are requirements for design and fabrication, thermal spray equipment qualification, coating selection, and operator and inspector certification. Additional consideration should be given to weldments whose oxyfuel cut edges may affect hardness which may preclude adequate profile depth.

Price: $48.00

SSPC-PS 24.00, Latex Painting System for Industrial and Marine Atmospheres, Performance-Based

This specification covers a painting system for steel surfaces based on multiple coats of air-drying, single-component latex paints having a total dry film thickness of a minimum of six mils (152 micrometers).

A painting system is categorized according to its performance level over blast-cleaned steel, the intended substrate.

The system is suitable for exposure in Environmental Zones IA (interior, normally dry), IB (exterior, normally dry), 2A (frequently wet by fresh water), 2B (frequently wet by salt water), 3A (chemical exposure, acidic), 3B (chemical exposure, neutral), 3C (chemical exposure, alkaline) and 3D (chemical exposure, mild solvent).

The system is not intended for immersion service.

Price: $25.00

SSPC-PS 26.00, Aluminum Pigmented Epoxy Coating System Materials Specification, Performance-Based

This specification covers the requirements for an ambient temperature cure, two-component aluminum pigmented epoxy coating that is intended for use as a single or multi-coat system on steel.

Coating systems meeting this specification are suitable for exposures in environmental zones 1A (interior, normally dry), 1B (exterior, normally dry), 2A (frequently wet by fresh water, excluding immersion), 2B (frequently wet by salt water, excluding immersion), and 3B (chemical exposure, neutral).

The specified coating system is intended for application by brush, spray, or roller. Type I is for use over steel surfaces blast cleaned to SSPC-SP 6 or better. Type II is for use over non-blast cleaned as well as blast cleaned steel surfaces, i.e., surfaces cleaned to SSPC-SP 2 or better. For either Type I or Type II, the surface should be prepared in accordance with the manufacturer's written recommendations.

Price: $25.00

SSPC-PS 27.00, Alkyd Coating System Materials Specification, Performance Based

This specification covers the requirements for an air-drying solvent-based alkyd coating system consisting of two or more coats of alkyd intended for use over blast cleaned steel. The specification covers both the system and the individual coating requirements. The requirements are based primarily on the performance of the coating system.

The coating system is suitable for exposure in Environmental Zones 1A (interior, normally dry), 1B (exterior, normally dry), 2A (frequently wet by fresh water, excluding immersion), and 2B (frequently wet by salt water, excluding immersion). The coating system is classified according to the drying time (fast, medium, slow) of the slowest drying coating layer.

Price: $25.00

SSPC-PS 28.01, Two-Coat Zinc-Rich Polyurethane Primer/Aliphatic Polyurea Topcoat System

This standard contains performance requirements for a coating system for steel substrates that consists of a zinc-rich moisture-cure polyurethane primer (complying with SSPC-Paint 40) and an aliphatic polyurea topcoat (complying with SSPC-Paint 39, Type 2).
The coating system is generally suitable for exposures in SSPC Environmental Zones 1A (interior, normally dry), 1B (exterior, normally dry), 2A (frequently wet by fresh water, excluding immersion), 2B (frequently wet by salt water, excluding immersion), 3B (chemical exposure, neutral) and 3C (chemical exposure, alkaline).

Price: $25.00

Results 31-36 of 36