Painting Systems (PS) and Coating Systems (CS)

Shopping Cart

	Your Cart is Empty
	View Cart

Product Search

Products Catalog
	Books
	Membership- Join/Renew
	SSPC Logo Wear
	Standards
		Summary of How to Use the SSPC Standards
		Abrasives (AB)
		Paint Application (PA)
		Painting Systems (PS) and Coating Systems (CS)
			SSPC-PS 15.01, Chlorinated Rubber Painting System for Salt Water Immersion
			SSPC-PS 15.02, Chlorinated Rubber Painting System for Fresh Water Immersion
			SSPC-PS 15.03, Chlorinated Rubber Painting System for Marine and Industrial Environments
			SSPC-PS 15.04, Chlorinated Rubber Painting System for Field Application over a Shop-Applied Solvent
			SSPC-PS 16.01, Silicone Alkyd Painting System for New Steel
			SSPC-PS Guide 17.00, Guide for Selecting Urethane Painting Systems
			SSPC-PS 18.01, Three-Coat Latex Painting System
			SSPC-PS Guide 19.00, Guide for Selecting Painting Systems for Ship Bottoms
			SSPC-PS Guide 20.00, Guide for Selecting Painting Systems for Boottoppings
			SSPC-PS Guide 21.00, Guide for Selecting Painting Systems for Topsides
		Paints and Coatings (PAINT)
		Qualification Procedures (QP)
		Surface Preparation (SP)
		Technology Guides (GUIDE)
		Technology Reports (TR)
		Technology Updates (TU)
		Test Panel Preparation Methods (ME)
		Technical Insight Reports
	Study Guides & Teasers
	2009 SSPC Products Catalog

Painting Systems (PS) and Coating Systems (CS)

These documents cover SSPC Painting Systems (PS) and Coating Systems (CS) documents, of which there are three types: complete painting systems, painting system guides, and performance-based painting system material specifications. PS and CS documents were developed only for steel surfaces, not for wood or concrete.

SSPC-PS 15.01, Chlorinated Rubber Painting System for Salt Water Immersion

Price: $25.00

SSPC-PS 15.02, Chlorinated Rubber Painting System for Fresh Water Immersion

This specification covers a complete chlorinated rubber painting system for structural steel.

This system is suitable for use on parts or structures exposed in Environmental Zones 2A (frequently wet by fresh water) and 2C (fresh water immersion). It may also be used in nonsolvent chemical atmospheres.

The finish paint allows for a choice of colors.

Price: $25.00

SSPC-PS 15.03, Chlorinated Rubber Painting System for Marine and Industrial Environments

This specification covers a complete chlorinated rubber painting system for structural steel.

This system is suitable for use on parts or structures exposed in Environmental Zones 1A (interior, normally dry), 1B (exterior, normally dry), 2A (frequently wet by fresh water), 2B (frequently wet by salt water), 3A (chemical exposure, acidic), 3B (chemical exposure, neutral), and 3C (chemical exposure, alkaline).

The finish paint allows for a choice of colors.

Price: $25.00

SSPC-PS 15.04, Chlorinated Rubber Painting System for Field Application over a Shop-Applied Solvent

This specification covers a field-applied chlorinated rubber painting system for structural steel shop-primed with a solvent base inorganic zinc-rich primer.

This system is suitable for use on parts or structures exposed in Environmental Zones 1A (interior, normally dry), 1B (exterior, normally dry), 2A (frequently wet by fresh water), 2B (frequently wet by salt water), 3A (chemical exposure, acidic), 38 (chemical exposure, neutral), and 3C (chemical exposure, alkaline).

The finish paint allows for a choice of colors.

Price: $25.00

SSPC-PS 16.01, Silicone Alkyd Painting System for New Steel

This specification covers a complete silicone alkyd painting system for structural steel.

This system is suitable for use on parts or structures exposed in Environmental Zones 2A (frequently wet by fresh water) including high humidity, infrequent immersion, and mild chemical atmospheres.

The primary virtue of this system is the exterior durability and minimum deterioration of the silicone alkyd finish as shown by chalk resistance, gloss retention, and color retention.

In addition, the finish paint allows for a choice of colors.

Price: $25.00

SSPC-PS Guide 17.00, Guide for Selecting Urethane Painting Systems

This guide outlines urethane painting systems for structural steel surfaces. There are three types of urethane coatings covered by the guide. They are Types II, IV, and V, as classified by ASTM Standard D 16.

# One-Package Moisture-Cured Urethane Coating (Type II): This coating contains moisture curing isocyanate terminated prepolymers which cure by reaction with moisture from the atmosphere. Reduced cure rate will result from insufficient atmospheric moisture (low relative humidity).
# Two-Package Catalyzed Urethane Coating (Type IV): This coating contains isocyanate terminated prepolymers which cure by reaction with a low molecular weight reactive catalyst. One package contains a prepolymer similar to Type II; the second package contains a relatively small quantity of catalyst to accelerate the room temperature cure. This coating has limited pot life after mixing.
# Two-Package Polyisocyanate Polyol-Cured Urethane Coating (Type V): This coating contains isocyanate terminated prepolymers which cure by reaction with hydroxyl-bearing polyols. One package contains the isocyanate terminated prepolymers and the second package contains a large quantity of resinous material containing active hydrogen groups. This coating also has limited pot life after mixing.

These painting systems are suitable for use on parts or structures exposed in varied types of environments ranging from severely corrosive environments to mild atmospheric conditions.

These painting systems are intended principally for structural steel where excellent weathering, color retention, and chemical resistance is desired. The color of the finish must be specified.

Price: $25.00

SSPC-PS 18.01, Three-Coat Latex Painting System

This specification covers a complete latex painting system for structural steel.

This system is suitable for use on parts or structures exposed in Environmental Zones 1A (interior, normally dry), and 1B (exterior, normally dry), and high humidity or mild chemical atmospheres.

The finish paint is semi-gloss, chalk resistant, and allows for a choice of colors.

Price: $25.00

SSPC-PS Guide 19.00, Guide for Selecting Painting Systems for Ship Bottoms

This guide covers painting systems for ship bottoms from the keel to the light load line on steel ships. The area from the light load line to the deep load line, more commonly called the boottop area, may also be coated with these systems; however, SSPC-PS Guide 20.00 covers painting systems for this area. It should be noted that boottops are rarely used with today's commercial ships, and bottom systems may extend up to the deep load line.

These coating systems may also be used for other floating or stationary structures exposed to or submerged in salt or brackish water. This would include barges, buoys, oceanographic installations, etc.

Price: $25.00

SSPC-PS Guide 20.00, Guide for Selecting Painting Systems for Boottoppings

This guide covers painting systems for the protection of the exterior boottop areas (the area from the light load line to the deep load line) of steel ships. It should be noted that boottops are rarely used with today's commercial ships and bottom systems may extend up to the deep load line. In general, the anti-corrosive and antifouling paints covered in SSPC-PS Guide 19.00 are applicable to boottop areas.

Price: $25.00

SSPC-PS Guide 21.00, Guide for Selecting Painting Systems for Topsides

This guide covers painting systems for the protection of the topside or exterior area of steel ships. This includes the area from the deep load line to the rail, more commonly called the freeboard, decks, and superstructure.

These systems can also be used for above-water parts of floating structures exposed to salt or fresh water and the normal marine environment. They also cover all above-water areas on ships such as deck equipment or machinery, booms, mast, and bulwarks.

Price: $25.00

Results 21-30 of 36