SSPC-Paint 19, Chlorinated Rubber Topcoat Paint

Shopping Cart

	Your Cart is Empty
	View Cart

Product Search

Products Catalog
	Books
	Membership- Join/Renew
	SSPC Logo Wear
	Standards
		Summary of How to Use the SSPC Standards
		Abrasives (AB)
		Paint Application (PA)
		Painting Systems (PS) and Coating Systems (CS)
		Paints and Coatings (PAINT)
			SSPC-Paint COM, Commentary on Paint Specifications
			SSPC-Paint 8, Aluminum Vinyl Paint
			SSPC-Paint 9, White (or Colored) Vinyl Paint
			SSPC-Paint 15, Steel Joist Shop Primer/Metal Building Primer
			SSPC-Paint 16, Coal Tar Epoxy Polyamide Black (or Dark Red) Coating
			SSPC-Paint 17, Chlorinated Rubber Inhibitive Primer
			SSPC-Paint 18, Chlorinated Rubber Intermediate Coat Paint
			SSPC-Paint 19, Chlorinated Rubber Topcoat Paint
			SSPC-Paint 20, Zinc-Rich Coating (Type 1 - Inorganic, and Type II - Organic
			SSPC-Paint 21, White or Colored Silicone Alkyd Paint (Type I, High Gloss, and Type II, Medium Gloss
		Qualification Procedures (QP)
		Surface Preparation (SP)
		Technology Guides (GUIDE)
		Technology Reports (TR)
		Technology Updates (TU)
		Test Panel Preparation Methods (ME)
		Technical Insight Reports
	Study Guides & Teasers
	2009 SSPC Products Catalog

SSPC-Paint 19, Chlorinated Rubber Topcoat Paint

This specification covers a fast drying chlorinated rubber topcoat paint, available in white or tints, intended for use as either a topcoat or intermediate coat over a chlorinated rubber intermediate, chlorinated rubber primer, or another suitable primer. It has good durability when exposed to exterior environments, but may show some tendency to chalk. This coating may be used on exterior non-submerged surfaces, as well as most submerged surfaces. This coating is not recommended for areas exposed to strong organic solvents, oxidizing acids, or to areas where the surface temperature exceeds 165—F (74—C). Straight chain unsaturated acids, and fats and oils of animal or vegetable origin will cause softening and swelling of the coating.

This coating is suitable for exposures in Environmental Zones 1A (interior, normally dry), 1B (exterior, normally dry), 2A (frequently wet by fresh water), 2B (frequently wet by salt water), 2C (fresh water immersion), 2D (salt water immersion), 3A (chemical, acid), 3B (chemical, neutral), and 3C (chemical, alkaline).

This paint is intended for application by brush, roller, or spray and is to be applied in accordance with SSPC-PA 1, Shop, Field, and Maintenance Painting of Steel.

The preferred types of primers for use under this coating and on steel surfaces include chlorinated rubber (SSPC-Paint 17), modified chlorinated rubber, chemically cured epoxy, zinc-rich, and others specifically recommended by the manufacturer. Recoat of each primer should conform to the manufacturer's directions. Where a zinc-rich primer is used and the system is considered for water-immersion services, a seal coat between the primer and this intermediate coat may be required to eliminate blistering.

Price: $25.00

Tell a Friend