 |
| The DT Series features
Clary’s On-Line Double Conversion, power factor corrected
technology for high reliability. Cash registers, POS Terminals,workstations and communication equipment are typical applications
that can benefit from Clary’s UPS products. All DT Series
Systems support RS232 and SNMP protocols when communications
back to the network are required. Available in tower and
rack-mount configurations with support for external battery
chassis when extended run-times are required. Custom configurations
available. Please consult factory. RATINGS: 1,250VA / 1,500VA / 2,000VA
to 2,400VA;
120/120 VAC; 50/60 Hz. UL listed.
• Both Rack & Tower Configurations
• Small size – 3U racks, smallest in the industry
• Power factor Corrected to near unity
• Rackmount version fits into standard 19” rack
• Outputs can be controlled remotely or from front panel
• Software selectable configuration (output frequency,
voltage, alarms, auto turn-off, etc.)
• Automatic bypass and battery test
• Unit can also be cold started from batteries when
no AC voltage is present.
• Tower units include carrying handles
• Many options available for custom configurations.
Consult factory.

|
|
 |
 |
 |
 |
 |
| |
 |
 |
 |
| |
 |
 |
 |
|
 |
 |
 |
 |
|
|
 |
| Assures continuous system operation during
electrical surges and sags without switching to the batteries
and depleting their capacity. |
|
|
|
 |
| True On-Line means Fully Regenerative, Dual Conversion
operation. It assures complete isolation from voltage and frequency
variations. Unlike “line-interactive,” “off-line”
or “standby” systems, there is absolutely no interruption
of power output or shift in line frequency to cause system crashes
or resets. Complete compatibility with emergency standby generator
systems is assured. |
|
| Full Microprocessor Control |
|
 |
| Every aspect of system operation is monitored and
controlled by the internal microprocessor. This assures flawless operation
regardless of load, environmental or input power conditions. Clary
has over 30 years experience designing with Digital Technology, which
ensures reliability. |
|
|
|
 |
| Power Factor Correction eliminates distortion and harmonic
currents caused by today’s high-tech loads. Eliminating this
distortion assures that all of your equipment works together without
problems. It also reduces your energy bill. |
|
| Communication and Control Interface’s |
|
 |
| Allows interactive system control over a variety of
network connections and communication interfaces - RS-232 (standard),
Contact Closure and TCP/IP - SNMP (optional). |
|
| Complete Power Distribution Center |
|
 |
| Six NEMA 5-15R connectors on two separate circuits
are standard. An ergonomic design feature is two receptacles at 90°
enabling a wall mounted transformer to only cover one receptacle.
Custom rear panels are available with a variety of connectors to fit
special applications. |
|
Remote Control of Receptacles (Two Circuits)
|
|
 |
| Each row of output connectors can be individually switched
on or off at the front panel. Locked-up devices are a fact of life
and this control allows the user to reboot devices powered by the
UPS. Using a communications link, a remote operator (and/or network
administrator) can also control and monitor each circuit. |
|
| Long Life Internal Batteries Options |
|
 |
| Special VRLA batteries that offer longer discharge
and float life allow full system operation during blackouts and
severe brownouts. (See specification page for run time.)
|
|
| Additional Battery Options |
|
 |
| For applications that require longer operation
during a power outage, additional battery packs can be
connected to the system to extend run times are. |
|
|
|
 |
| SNMP capability via TCP/IP Network connection. Compatible
with more software than any other UPS including, HP Openview™,
CA Unicenter TNG™ and other major software packages. SNMP Product
|
|
|