|
|
Range of Application: For interior timber after pre-treatment with LIVOS products. For maintaining of previously waxed or oiled timber; for restoration of old furniture or wood carvings. For the care of KERA Cott and linoleum.
Technical Qualities: Transparent, velvet gloss, moisture-resistant, antistatic finish. DIN EN 71 Part 3 certified.
Dilution: Delivered ready to use.
Application Method: Brush, roller, spraying device, or with a wadded cloth.
Coverage: 1 liter (1.06 fl. quart.) is sufficient for approximately 100 m2 (1076 ft²), i.e. 10 ml/m², when applying with a wadded cloth and pre-treated surfaces. 1 liter (1.06 fl. quart.) is sufficient for up to 167 m2 (1800 ft²), i.e. 6 ml/m², for other modes of application. Coverage could be considerably less depending upon the condition and absorbency of the surface. Always do a test application!
Cleaning Up: Clean equipment immediately after use with SVALOS Dilutant No. 222.
Drying Time: Application with a wadded cloth approximately 20 – 30 minutes at 23OC and 50% relative humidity. A drying time of 30 – 120 minutes is required when applying by spraying device. All other application methods 24 hrs.
Specific Gravity: 0.84 g/ml.
Safety Advice: Always be sure to store cleaning cloth, polishing pads, sponges, etc. that are still wet or even slightly moist with BIVOS-Oil-Wax No. 375 in an airtight metal container or in water and dispose, as there is a danger of spontaneous combustion caused by the vegetable oil content in the product. The product alone will not undergo spontaneous combustion. Contains limonene. S 2 Keep out of the reach of children S 62 If swallowed, do not induce vomiting: Seek medical advice immediately and show the container or label.
Disposal: According to locally regulated laws.
Storage: Cool and dry, please see label for expiration date. Close lid tightly after use, transfer unused portion of product to a smaller container for storage.
|
|
|
|
