|
|
BEKOS Wax #312 2.5L
BEKOS Wax #312 2.5L
Click to View Technical Information
For use on interior timber surfaces such as furniture, doors, and wall and ceiling panelling after pre-treatment with LIVOS products. Not suitable for rough surfaces, floors, or moist areas.
|
| Range of application |
Interior timber surfaces such as furniture, doors, and wall and ceiling panelling after pre-treatment with LIVOS products. Not suitable for rough surfaces, floors, or moist areas. |
|
| Technical qualities |
Silky gloss, antistatic finish. |
|
| Full declaration |
Carnauba wax, beeswax, larch resin, Isoaliphates, orange oil, Dammar and ethanol. |
|
| Color |
Clear. |
|
| Dilution |
Delivered ready to use. |
|
| Application method |
Apply very thinly with a cloth or wax brush. The dried coating must be polished. |
|
| Coverage |
1 liter (1.06 fl. quart.) is sufficient for approximately 75 - 95 m2 (807 – 1022 ft²) per coat, i.e. 12 ml/m². Coverage could be considerably less depending upon the condition and absorbency of the surface. Always do a test application! |
|
| Drying time |
At 230C (730F) and 50 % relative humidity, approximately 24 hours. |
|
| Cleaning up |
Clean equipment immediately after use with SVALOS Dilutant No. 222. |
|
| Specific gravity |
0.79 g/ml. |
|
| Safety advice |
|
R 10 Flammable
R 38 Irritating to skin
S 2 Keep out of the reach of children
S 62 If swallowed, do not induce vomiting: seek medical advice immediately and show the container or label
Irritant
UN No. 1263 | |
| Disposal |
According to locally regulated laws. |
|
| Container sizes |
0.05 l; 0.2 l; 0.375 l; 2.5 l. |
|
| Storage |
Cool and dry, please see label for expiration date. After use smooth surface, close lid tightly and use within 3 months. |
How to use BEKOS-Wax No. 312
|
|
| Preparation |
Prime surface with LIVOS oils or LIVOS stains, like MELDOS Natural Resin Hardening Oil No. 264, ARDVOS Wood Oil No. 266, GORMOS Wax Oil No. 267, DAGOS Natural Oil Impregnation No. 269, DARIX Transparent Wood Stain No. 297. |
|
| Application |
Apply very thinly and evenly with a wadded rag or a wax brush. Warning: Applying too thickly can cause surface to be sticky and difficult to polish. Drying time: 24 hours. Polish with cloth, polishing brush or polishing machine. Polishing should be done in the direction of the wood grain. The greater the amount of polishing, the higher the waxed surface’s wear-resistance! |
|
| Care |
Remove dust with vacuum cleaner or mop. Rubber scuffs and other heavy soiling can be removed with SVALOS Dilutant No. 222. Depending upon the degree of use of the surface, re-treat the surface 1 - 2 times yearly with GLEIVO Liquid Beeswax No. 315 or BIVOS Oil Wax No. 375. Day to day cleaning possible with TRENA Neutral Cleaner No. 556. |
|
| Renovation |
Thoroughly clean soiled or otherwise damaged areas with LATIS Intensive Cleaner No. 551 or TRENA Neutral Cleaner No. 556, sand and re-oil if necessary, then re-wax with a thin coat of BEKOS No. 312 and polish. |
|
| April 2005 |
Rev. 1.4 |
|
LIVOS products contain organically sourced ingredients and are never tested on animals.
These directions are the result of long years of research and practical testing. They are backed by our most current expert information. New findings may invalidate this information. This data sheet is meant to serve as information and instruction. No legal liability should be interpreted from it. In case of doubt, please contact the retailer, wholesaler, or manufacturer. |
|
|
|
|
