DIRECTIONS

Floor Tile Mastic Removal:
Step One: If necessary, protect walls, drains, cracks and other flooring with an absorbent (rags, kitty litter, sawdust) to keep liquefied mastic contained.

Step Two: Wet the entire adhesive surface with 747™ .This may be done by using a sprayer or by mopping 747™ over the surface of the mastic. Allow 747™ to soak and penetrate for 10-20 minutes to saturate the mastic.

Step Three: Scrape or squeegee the bulk of the softened or liquefied mastic from the sufrace with a floor scraper (razor scraper) or floor squeegee.

Step Four: Wash and rinse the floor thoroughly with Sentinel 810 and water to ensure a clean surface.

Allow to dry a minimum of 24 hours before installing new flooring.

Coverage for the mastic remover will range from 100-200 square feet per gallon.